Remove dust, clean, and tape the edges to avoid sanding the body parts.

Remove yellowing and scratches with the discs

Always sand with water at approximately 500–900 rpm.

Progressive sanding: P800 → P1200 → P1500 → P2000 → P2500 → P3000

Apply the paste and polish for 4–5 minutes until shiny.

Speed: 600–1600 rpm. Reapply paste every 1–1.5 min.

With the headlight dry and shaded, apply the protective liquid with cotton.

Let dry for 15 min and cure in the sun for 1–2 hours.

When finished, do not wet the headlight or wash the car for 24 hours.